Precautions for using servo turret

Aug 26,2022

In the field of woodworking, the application of cutting tools is becoming increasingly common. Its advantage is that it can quickly replace various tools and perform various machining processes, and the servo tool library system is one of the devices used for tool storage and tool replacement. The automatic tool changing mechanism and the tool magazine or holder that can store multiple types of tools, under the control of the CNC system, can complete various machining requirements such as milling, drilling, lining, tapping, etc.

To keep the servo turret in good working condition at all times. That definitely requires mastering some knowledge of maintenance and upkeep. Today, we will talk about the precautions in the operation and use of servo turret. If you want to know about these issues, come here to learn more.

Servo turret

We can tell from its name what the servo turret is used for. As a mechanical device, it has many advantages and functions, but there are also many things to pay attention to during operation. For example, when using a servo turret, do not thread the power line and signal line through the same pipeline, and do not tie them together. When wiring, the distance between the power line and the signal line should be greater than 30cm. Besides these places, there are also some more important places. For example, for its signal line and encoder (PG) feedback line, please use multi stranded wire and multi-core shielded twisted wire. For the wiring length, the command input line length is 3M, and the PG feedback line length is 20m. You can go now. Even if the power is turned off, there may still be high voltage in the servo unit. Do not touch the power terminal within 5 minutes. Please confirm that the charging indicator light is off before checking. Do not frequently turn on/off the power of the servo turret here. When continuous power on and off is required repeatedly, please control it to no more than once within 1 minute. This is a legitimate manufacturer. Friends who want to order this product may come here to choose. I believe it won't disappoint you. The prices here are reasonable and the quality is guaranteed.

In addition, the servo turret has a capacitor in the power supply section of the servo device, so when the power is turned on, it naturally generates a large charging current (charging time of 0.2 seconds). Therefore, if the power is frequently turned on/off, the performance of the main circuit components in the servo unit will decrease, and you will be reminded to send an input command to start/stop the servo motor after sending the servo turret open signal. Therefore, when encountering these situations, please do not send input commands first and then use the/s-on signal to start/stop the servo motor. If the AC power supply is repeatedly turned on and off, the internal components will age, leading to accidents. Then, after wiring, strictly check whether the wiring sequence is correct, and only after confirming it is correct, turn on the power. This is mainly to prevent equipment from short circuiting and burning out due to wiring errors. Only in this way can the DC power ground be effectively connected. This is to prevent leakage and electric shock, ensuring the safety of users. The motor of the servo turret operates at high temperatures. Please do not touch the motor with your hands to prevent burns.

The above article is about the precautions for using servo turret for friends, and also shares a good servo turret manufacturer in the content. If you have such needs, you can check it out. I hope it can be helpful to you.